This website is not affiliated with the Slant Fin humidifier company in any manner whatsoever. All copyrights are property of their respective holders.

Operating instructions for a slant fin humidifier.

To set up your slant fin humidifier, you must first place it in on a level surface. It is preferable that the surface be dry and not slippery. Place your humidifier filter at the bottom of the water tank, and then begin filling up your humidifier’s water tanks. Wipe away any excess water from the unit. Then plug the power cord completely into the wall as well as the unit and turn on your humidifier. To start off, it is best to switch your humidifier to the LO mode. Then, turn the humidity knob to the desired level until you hear a faint click and the power light comes on. It is perfectly normal for your unit to take some time to heat up, and begin producing mist.

The ‘refill water’ light will come on when the unit needs to be refilled with water. A full tank of water can last you close to three days or 48 hours of constant running time. The unit automatically stops heating or producing mist when the water levels are low. The heating element shuts off automatically once the unit has indicated the refill water light. The unit will operate with water in both or in one tank respectively.

Slant Fin Humidifier Absorption Pad Replacement Instructions

Slant Fin humidifiers do not spew white dust also known as mineral dust into the mist they create. Not only does this benefit individuals who suffer from respiratory problems but also helps keep the furniture and the floor free from unnecessary mineral dust. The unique construction of the slant fin humidifier enables it to trap the dust in its filtration system. The filtration system is mainly composed of the mineral absorption pad. Though the unit is perfectly capable of running without a absorption pad, it will need to be cleaned a lot more frequently. It is advisable to place the pad in warm water before placing it into the humidifier unit. Then, use tongs or a pair of tweezers to place the pad into its correct position inside the unit. The life of the pads will vary depending on how hard the water being used with the humidifier unit is. As a general rule of thumb, absorption pads must be changed at least once every month if the unit is being used constantly. Mineral absorption pads become stiff or hard during the end of their life-cycle. Sometimes, they may even turn yellow or exhibit a layer of salt deposit on them.

Slant fin Replacement Mineral Absorption Pads for SF211 and UV Bulb are best selling absorption pads, available at discounted price from amazon stores. Some of the most sold absorption pads are Slant Fin 195518 Mineral Absorption Pads and 3-1/4 Slant/Fin Humidifier Replacement Mineral Absorption pads.